Tel：0086 532 80626822
BTS Type Wind Charge Controller
Product picture
Performance features
1. Compatible with various types of energy storage
Ordinary lead-acid, lithium, hydrogen, sodium and other energy storage types can be connected.
2. MPPT wind power generation control strategy
MPPT charging mode is adopted to improve the power generation efficiency of wind energy and photovoltaic energy, which can increase the energy conversion rate by more than 30% compared with the ordinary wind power generation system.
3. High degree of integration
This product not only contains rectifier unloading, converter functions, but also built-in wind turbine safety protection system, to achieve the start and stop control of wind turbine over-voltage, over-wind speed, over-rotate speed alarms etc.
4. No external control power is required
Wind turbine control system adopts wind turbine self-powered energy, wide voltage range input, do not need external battery for power supply.
5. Easy maintenance
System internal modular design,light appearance
Core devices support hot swapping
Equipped with large size LCD touch screen, easy parameter setting and manual operation.
6. Remote monitor
Support 4G/5G, GPRS, WIFI and other types of data transmission channels;
Equipped with the corresponding Mobile/ Computer APP
Support remote start - stop, remote reset function
Support remote data export function
Equipped with the communication interface required by the monitoring of the upper computer, it supports RS485/TCP Modbus communication protocol.
Model and specification
|
Item |
Specifications |
|
|
Model |
AHWCC-0548 |
AHWCC-1048 |
|
Battery side |
||
|
Batter type |
Lead acid, lithium etc. |
|
|
Rated charging power |
5kW |
10kW |
|
Rated charging current |
100A |
200A |
|
Charging voltage |
42VDC～60VDC (Adjustable, according to battery type) |
|
|
Battery charging management function |
Yes |
|
|
Peak-peak noise |
≤200mV |
|
|
Stabilized voltage precision |
≤±0.5% |
|
|
Stabilized current precision |
≤±1% |
|
|
Wind turbine side |
||
|
Rated input voltage |
220Vdc |
|
|
Output voltage |
95VDC~400VDC |
|
|
MPPT voltage |
120VDC~350VDC |
|
|
Rated power |
5kW |
10kW |
|
Rated current |
30A |
60A |
|
Power factor(PF) |
≥0.99 |
|
|
Input protection |
Insurance, lightning protection circuit |
|
|
Additional function |
||
|
DC load control |
Optional, over and under voltage protection |
|
|
Remote monitor |
Optional, Mobile/Computer APP |
|
|
Current limit adjustable range |
Optional: 10%~110% stepless adjustable (the upper computer can adjust with authority, suitable for micro grid system) |
|
|
Communicate with BMS |
Optional |
|
|
Wind speed detection function |
Optional |
|
|
Wind turbine safety protection system |
Optional |
|
|
Wide temperature application environment |
Optional: -40℃ ~ 45℃ normal operation; 45℃~75℃ reduced output |
|
|
Working environment |
||
|
Working temperature |
1.Normal temperature type: -20℃ ~ 45℃ normal operation;45℃~75℃ reduced output; 2.Low temperature type: -40℃ ~ 45℃ normal operation;45℃~75℃ reduced output. |
|
|
Storage temperature |
-40℃～75℃ |
|
|
Relative humidity |
0～95% |
|
|
Altitude |
2000m,full load output |
|
|
Product safety and reliability |
||
|
Dielectric strength |
Input to the casing: can withstand 50Hz, effective value 2500VAC or equivalent 3535VDC voltage for 1 minutes; Input to output: can withstand 50Hz,effective value 3000VAC or equivalent 4242VDC voltage for 1 minute |
|
|
MTBF |
＞120000hours |
|
|
Dimensions and weight |
||
|
Dimensions |
485mm×312mm×522mm(W×H×D),standard rack-mounted type |
|
|
Module net weight |
45Kg |
|
|
Communications |
||
|
Connection port |
Standard:RS485/TCP |
|
